SPEED OR PRECISION YOUR CHOICE
Feel the difference right where it counts. GTS adds a discreet finger rest at the tip, giving you extra leverage to ease the pull and lower resistance, all while staying fully match-legal.
Long Range Shot? Use just the tip for more control.
Close Quarters? Your finger will naturally rest in the curved section.
AR-15 .223/.308 VS AR-9 TRIGGER
The AR-9’s blowback system packs a punch, cycling fast and hitting hard compared to the smooth operation of the AR-15’s gas-driven system. This characteristic demands a trigger that can handle the extra abuse, deliver reliable resets, and maintain consistent performance under stress.
Because of this there is a separate version your dedicated to your PCC.
​
The Trigger Scout Breachers are optimized to be compatible with almost every fire arm, just be sure to pick the right one in terms of striker size.
AR 9 striker: 6,36 mm
AR 15 striker: 6,43 mm
QUICK START GUIDE:
1. Remove grip, trigger pins and old trigger
2. Drop in new trigger
3. Install the anti-walk pins and secure them
4. Tighten down the set screws.
5. Reinstall safety and grip.
6. Check safety, trigger for proper function.
If you’re not completely sure about the process, reach out to your armory or a certified gunsmith. There’s no shame in getting it done right.
SECURE INSTALLATION
Not only is the trigger held in place firmly by two set screws, it also comes with two anti-walk pins lock to lock it firmly in place, even in the most challenging conditions.
For those who are extra serious about reliability, a drop of thread locker can be added for an even more robust hold.
YOU CAN FEEL THE DIFFERENCE
A single-stage trigger with a super-crisp break, ultra-short reset, and flawless consistency. Shipped pre-adjusted to 1.6kg, it’s ready for action straight out of the box.
Expect faster transitions, tighter hits, and the confidence to excel in any scenario. Clean break, smooth reset - no distractions. It just delivers.
STEP-BY-STEP VIDEO GUIDE
Watch our German Tactical Systems Scout-Breacher Trigger Installation video where our expert Hans gives you a quick step-by-step guide on how to install the trigger.
HOW TO CHANGE THE TRIGGER WEIGHT
The default trigger weight of the Scout Breached Trigger is 1.6kg, which is our recommendation for optimal handling and has been thoroughly tested.
However, if you desire a higher or lower weight for the trigger, you can adjust it at your own risk: on the top of the triggers shell, you can find an hexagonal screw that is secured with a glue seal. You can remove this seal with i.e. picking tools and then use the included hexagonal key on this screw to adjust the wheight by turning it.
Please note that after the seal has been removed, the safety of your trigger will be your own responsibility. We only recommend to adjust it yourself if you know what you are doing.